Maintenance of fiber cleaver

How to maintenance the fiber cleaver? The maintenance and maintenance of fiber cleaver should be carried out in the following ways:

1, check the steel belt, must ensure tension.Otherwise in run out of the question, probably will hurt people, serious still can cause death.Steel with seemingly little things, out of the question is a bit serious.

2, check every six months rail straightness and verticality of the machine, found abnormal timely maintenance and debugging.Didn’t do this, may be cut out of the effect is not good, the error will increase, affect the cutting quality.This is a top priority, have to do.

3, once a week for the vacuum suction off the dust and dirt inside the machine, all electrical cabinets should be protected from dust.

4, the guide should often clean, remove dust and other sundry, ensure the normal order of the equipment rack always wipe, add lubricating oil, ensure lubricating and no clutter.Guide to regular cleaning and lubricating oil, and the motor is always clean and grease, machine in March will be better and more accurate cutting, cutting out the product quality will be improved.

5, bifocal laser cutting head is the perishable goods on the laser cutting machine, use for a long time, lead to damage of laser cutting head.To regularly check the maintenance.If there is any deformation or other form, by this time you should know the laser cutting head is damaged, to be replaced.Don’t be replaced will influence the cutting quality, increase cost, some products may be secondary processing, reduce the production efficiency.Laser cutting head looking for professional manufacturer produces, replenish onr’s stock, I will carefully check, in order to avoid problems when the time comes when using.